Predictive control of wind turbines by considering wind speed forecasting techniques

A wind turbine system is operated such that the points of wind rotor curve and electrical generator curve coincide. In order to obtain maximum power output of a wind turbine generator system, it is necessary to drive the wind turbine at an optimal rotor speed for a particular wind speed. A Maximum Power Point Tracking (MPPT) controller is used for this purpose. In fixed-pitch variable-speed wind turbines, wind-rotor parameters are fixed and the restoring torque of the generator needs to be adjusted to maintain optimum rotor speed at a particular wind speed for optimum power output. In turbulent wind environment, control of variable-speed fixed-pitch wind turbine systems to continuously operate at the maximum power points becomes difficult due to fluctuation of wind speeds. In this paper, wind speed forecasting techniques will be considered for predictive optimum control system of wind turbines

Generalized parton distributions and wide-angle exclusive scattering

The handbag mechanism for wide-angle exlusive scattering reactions is discussed and compared with other theoretical approaches. Its application to Compton scattering, meson photoproduction and two-photon annihilations into pairs of hadrons is reviewed.Comment: 5 pages, 4 figures using LATEX with npb.st

Expected Sensitivity to Galactic/Solar Axions and Bosonic Super-WIMPs based on the Axio-electric Effect in Liquid Xenon Dark Matter Detectors

We present systematic case studies to investigate the sensitivity of axion searches by liquid xenon detectors, using the axio-electric effect (analogue of the photoelectric effect) on xenon atoms. Liquid xenon is widely considered to be one of the best target media for detection of WIMPs (Weakly Interacting Massive Particles which may form the galactic dark matter) using nuclear recoils. Since these detectors also provide an extremely low radioactivity environment for electron recoils, very weakly-interacting low-mass particles (< 100 keV/c^2), such as the hypothetical axion, could be detected as well - in this case using the axio-electric effect. Future ton-scale liquid Xe detectors will be limited in sensitivity only by irreducible neutrino background (pp-chain solar neutrino and the double beta decay of 136Xe) in the mass range between 1 and 100 keV/c^2. Assuming one ton-year of exposure, galactic axions (as non-relativistic dark matter) could be detected if the axio-electric coupling g_Ae is greater than 10^-14 at 1 keV/c^2 (or $10^-13 at 100 keV/c^2). Below a few keV/c^2, and independent of the mass, a solar axion search would be sensitive to a coupling g_Ae ~ 10^-12. This limit will set a stringent upper bound on axion mass for the DFSV and KSVZ models for the mass ranges m_A < 0.1 eV/c^2 and < 10 eV/c^2, respectively. Vector-boson dark matter could also be detected for a coupling constant alpha'/alpha > 10^-33 (for mass 1 keV/c^2) or > 10^-27 (for mass 100 keV/c^2).Comment: 17 pages, 10 figure

The Value of Online Information Privacy: An Empirical Investigation

Concern over online information privacy is widespread and rising. However, prior research is silent about the value of information privacy in the presence of potential benefits from sharing personally identifiable information. Analyzing individuals' trade-offs between the benefits and costs of providing personal information to websites revealed that benefits, monetary reward and future convenience, significantly affect individuals' preferences over websites with differing privacy policies. Quantifying the value of website privacy protection revealed that among U.S. subjects, protection against errors, improper access, and secondary use of personal information is worth US $30.49 - 44.62. Finally, three distinct segments of Internet consumers were determined: privacy guardians, information sellers and convenience seekers.

Metal Transfer in Arc Welding

A double pulse welding current method is disclosed for the generation and transfer of droplets of welding metal from an electrode wire to a workpiece in an arc welding process. A suitable background direct current level is specified to deliver a desired number of droplets to the weld site. During each cycle of droplet formation and transfer, a first increased current pulse is applied to the electrode and arc to generate a droplet on the tip of and electrode and then a second further increased current pulse is applied to timely separate the droplet from the electrode for transport in the arc to the workpiece. This double-pulse current application reliably produces one droplet per cycle of pulses to deliver a specified number of droplets to the weld site for improved weld quality and reduced spatter or waste of weld metal

Method of Metallurgically Bonding Articles and Article Therefor

An article suitable for metallurgical bonding having a first part having a lower surface, and a second part having an upper surface is disclosed. The lower surface of the first part is disposed at the upper surface of the second part to provide for a faying surface thereat. The faying surface has a plurality of channels having a depth equal to or greater than about 1 micron and equal to or less than about 1000 microns. The article is suitable for metallurgical bonding at the faying surface

A Microcantilever-based Gas Flow Sensor for Flow Rate and Direction Detection

The purpose of this paper is to apply characteristics of residual stress that causes cantilever beams to bend for manufacturing a micro-structured gas flow sensor. This study uses a silicon wafer deposited silicon nitride layers, reassembled the gas flow sensor with four cantilever beams that perpendicular to each other and manufactured piezoresistive structure on each micro-cantilever by MEMS technologies, respectively. When the cantilever beams are formed after etching the silicon wafer, it bends up a little due to the released residual stress induced in the previous fabrication process. As air flows through the sensor upstream and downstream beam deformation was made, thus the airflow direction can be determined through comparing the resistance variation between different cantilever beams. The flow rate can also be measured by calculating the total resistance variations on the four cantilevers.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/16838